Intech Sheet Metal Joint Stock Company studies the plan to use solar power

Intech Group has been researching and providing options for using solar power for metal equipment. In the content of this article, we will cover the installation of solar power on a metal roof.

1. The perfect combination of metal roof and solar battery

Metal roofs can be used for a long time, which is why they are suitable for solar power systems because they last a long time.

According to research by scientists, metal roofs can last up to 70 years. Meanwhile, the types of plastic composite roofing sheets only have a term of about 15 to 20 years. Besides, most solar systems have a lifespan of about 25 to 30 years with strong capacity that can last longer depending on future technology.

When the solar panels time to be replaced with new ones, you can simply swap out the panels without the need for racks and rails. This will save a lot of time and money.

If the business or manufacturing facility has a metal roof with vertical seams and clamps to the seams already in place, when installing the solar system, there will be no need to drill holes in the roof. That will make the completion progress faster, reduce labor and don't need to worry about water absorption.

The clamps are made from aluminum with high strength, using only 1 bolt to fix the clamp. Most of it comes with a warranty of at least 10 years, which also helps to extend the life of the solar battery system.

2. How to properly install a solar power system

Build the case and base frame
Use glue or screws to attach the frame covers to the case. Apply UV protection paint evenly to the case and base frame 3 layers and let the paint dry completely. Note that the base frame should fit snugly on the case.

Attach the cells with solder wire

Engineers need to use small solder wire, flux, and solder pen to stick the cells together. Then, concatenate the soldered cells into a chain and place the strings in the liner and join them together.

Assemble the base frame to the case, and place the cover for the solar panel
Adjust the base frame to fit the solar panel back panel. Then, screw the base frame to the case carefully.

It is necessary to use 2 wires long enough to pull the back of the panel to the external energy receivers. Insert a long blocking diode into the conductor at the anode to prevent self-discharge.

Then, check the panel again, make sure it's working properly before proceeding to install the tempered glass panel.

Finally, cover the gaps between the case, frame edge and outer layer with silicon solder so that the battery panel is perfectly protected.

Overall check
To maximize solar efficiency, you should assemble at an angle and choose the right position to get the best sunlight all day.

Thoroughly test each part, the operation of the solar panels to ensure that they are in good working order.

Finally, start up and test the solar power system.

Intech sheet metal joint stock company has been researching solutions to use solar energy for sheet metal. We are a company specializing in processing sheet metal products such as folding, shielding, CNC punching. With many years of experience and a reputable unit in the market, we are proud to bring our customers professional services and extremely competitive prices. For detailed advice on the products you are interested in, please contact us by phone at 0901.761.511, 0903.471.511 or 02466.711.511 for expert advice from Intech Group. Best.